3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? three-wall header .100 .100 latch/ejector, straight and right angle 3000 series military (with 3ms 3518 or n3518 polarizing key) ? and center bump polarization low profle ? optional ejector latches ? mounting holes for securing header to board ? three wall shroud provides design fexibility ? solder tail and wrap tail options ? optional polarizing posts available ? optional high temperature insulator suitable for no ? lead soldering operations high temperature option is suitable for refow ? soldering using paste in hole techniques see regulatory information appendix for chemical ? compliance information date modifed: may 1, 2008 ts-0771-c sheet 1 of 5 physical insulator: material: glass filled polyester (pbt) glass filled polyester (pct) - high temp option flammability: ul 94v-0 color: gray (pbt), beige (pct), black (pct) contact: material: copper alloy plating: underplating: 100 ? [ 2.54 m ] nickel - overall wiping area: 30 ? [ 0.76 m ] gold solder tails: 200 ? [ 5.08 m ] tin lead or matte tin (see ordering information) marking: 3m logo, part identifcation number and orientation triangle electrical current rating: 2 a (eia 364-70) insulation resistance: >1 10 9 at 500 v dc withstanding voltage: 1000 v rms at sea level environmental temperature rating: -55c to +105c process rating: 260c (high temp. pct insulator) single pass (per j-std-020c) pbt gray insulator, maximum insulator temperature 191c (solder wave process only) moisture sensitivity level: 1 (per j-std-020c) high temp. (pct) versions only ul file no.: e68080
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? three-wall header .100 .100 latch/ejector, straight and right angle 3000 series ts-0771-c sheet 2 of 5 . 2 5 6. 4 . 31 7. 9 . 2 8 7. 1 d . 10 0 2 . 5 4 r e f . b p o s i t i o n #1 . 15 3 . 8 . 0 20 0 . 51 . 10 0 2 . 5 4 r e f . . 13 3 . 3 2x o . 10 0 [ 2. 5 4] s e e n o t e # 2 . 5 7 3 . 0 1 0 [ 1 4 . 5 5 ] - x 2 x x h e a d e r w i t h s h o r t e j ect o r / l a t c h f o r 3 m s o c k e t s w i t h o u t s t r a i n r e l i e f -x3 x x h e a d e r w i t h l o n g ejec t o r / l a t c h f o r 3 m s o c k e t s w i t h s t r a i n rel i e f . 4 2 4 . 0 1 0 [ 1 0 . 7 7 ] . 0 8 [ 2 . 0 ] . 9 7 r e f [ 2 4 . 6 ] . 3 7 r e f [ 9 . 4 ] . 4 6 r e f [ 1 1 . 7 ] 1 . 0 7 r e f [ 2 7 . 2 ] . 0 8 [ 2 . 0 ] f t yp s ection a - a ( s t r aight ) e . 0 1 0 . 3 0 [ 7 . 6 ] . 2 4 [ 6 . 1 ] . 0 2 5 . 0 0 2 s q t y p [ 0 . 6 4 ] c l ? y ? . 0 2 5 . 0 0 2 s q typ [ 0 . 6 4 ] p o s i t i o n 1 o r ien t a t i o n t r i a ngl e . 2 1 [ 5 . 3 ] . 2 4 [ 6 . 1 ] . 3 0 [ 7 . 6 ] f t yp e . 0 1 0 . 0 4 9 r e f . 1 0 0 r e f [ 2 . 5 4 ] 2 x ? . 1 0 0 [ 2 . 5 4 ] ( s e e n o t e 2 ) a c . 1 6 [ 4 . 1 ] . 1 9 7 [ 5 . 0 0 ] . 2 0 [ 5 . 1 ] n o t c h c ( s e e t abl e 1 & n o t e 1 ) notc h b ( s e e t a b l e 1 ) n o t c h a ( s e e t a b l e 1 & n o t e 1 ) b b section b- b . 6 8 [ 1 7 . 3 ] . 3 5 [ 8 . 9 ] . 0 2 0 [ 0 . 5 1 ] a a c l ? y ? (rig h t a ng l e ) . 1 2 [ 3 . 0 ] - x 0 x x h e a d e r w i t hou t l a t c h s a .68 [17.3]
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? three-wall header .100 .100 latch/ejector, straight and right angle 3000 series ts-0771-c sheet 3 of 5 table 1 pin qty 3m part number dimensions polarizing notches a b c d 10 3793 1.26 (32.1) 1.105 (28.07) 0.865 (21.97) 0.71 (18.0) bc 14 3314 1.46 (37.2) 1.305 (33.15) 1.065 (27.05) 0.91 (23.1) bc 16 3408 1.56 (39.7) 1.405 (35.69) 1.165 (29.59) 1.01 (25.6) abc 20 3428 1.76 (44.8) 1.605 (40.77) 1.365 (34.67) 1.21 (30.7) abc 26 3429 2.06 (52.4) 1.905 (48.39) 1.665 (42.29) 1.51 (38.3) abc 34 3431 2.46 (62.6) 2.305 (58.55) 2.065 (52.45) 1.91 (48.5) abc 40 3432 2.76 (70.2) 2.605 (66.17) 2.365 (60.07) 2.21 (56.1) abc 50 3433 3.26 (82.9) 3.105 (78.87) 2.865 (72.77) 2.71 (68.8) abc 60 3372 3.76 (95.6) 3.605 (91.57) 3.365 (85.47) 3.21 (81.5) abc 64 3764 3.96 (100.7) 3.805 (96.65) 3.565 (90.55) 3.41 (86.6) abc inch (mm) .005 .1 .01 tolerance unless noted .0 .00 .000 inch [ ] dimensions for reference only table 2 3m part number suffx contact tail dimension e pin cross section dimension g dimension f diagonals corner radii -1xx2 -2xx2 solder tail for .062 (1.57) thick pc board .112 (2.84) .0245 .0005 (0.622) .028 .001 (0.71) .0075 ref (0.191) 0.035 .003 (0.89) (see note 3) -1xo3 -2xo3 solder tail for 0.94 (2.39) to .125 (3.18) thick pc board .155 (3.94) .0245 .0005 (0.622) .028 .001 (0.71) .0075 ref (0.191) 0.035 .003 (0.89) notes: 1. notches a & c will accomodate 3m polarizing keys (3m part #3518 or n3518). 2. accepts rear and front mounting hardware: rear entry: #4-24 thread cutting screw, 3m part #3341-5, .116 [2.95] dia mounting hole front entry: (prior to installation of latch on straight versions) #2-56 bolt and nut, 3m part #3341-6, .106 [2.69] dia mounting hole 3. the recommended pcb hole size for the kinked tail positions on the .112 solder tail connector is .035 .002. kink is located .05 below bottom surface of plastic. external radius of kink toward part centerline ? . 10 6 [ 2 . 69] o r ? . 1 1 6 [ 2 . 9 5 ] ( s ee not e 2 ) g dim posit i on 1 .1 0 0 . 0 0 3 [2 . 5 4 ] . 100 . 003 [ 2 . 54] . 060 [ 1 . 52] . 3 0 0 [ 7 . 6 2 ] side t o side s t ackabi lity b r e c o mme nded mou nting h o le patte r n (strai ght) . 3 5 2 [ 8 . 94] c l ?y? c l . 4 1 [ 1 0 . 4 ] max to e d ge o f pcb f o r d a i s y chain ? . 1 0 6 [ 2 . 69] o r ? . 1 1 6 [2 . 95] ( s ee not e 2 ) g dim . 029 [ 0 . 7 4 ] . 100 . 003 [ 2 . 5 4 ] p o s i t i o n 1 .2 3 2 [ 5 . 8 9 ] c reco mmen ded mou n ting hol e pattern (right angle) . 100 . 003 [ 2 . 54] ? y ?
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? three-wall header .100 .100 latch/ejector, straight and right angle 3000 series ts-0771-c sheet 4 of 5 part customization this spec sheet details our standard offering. 3m has several capabilities that can provide a part tailored to your specifc needs. ask your 3m sales representative or customer service for more details. use of snap-in style latch/ejectors in either short (n3xxx x5xx) or long (n3xxx-x6xx) styles, installed or shipped separately (the -5 & -6 snap-in latches are dimensional and functional equivalents to the -2 & -3 roll pin latches) which are also available separately with roll pins included. refer to chart below. if ordering snap-in or roll pin style latches separately, please use the below chart short latch long latch latch style color standard temperature (pbt) 3505-2 3505-3 roll pin gray high temperature (pct) n3505-2 n3505-3 roll pin beige high temperature (pct) n3505-2b n3505-3b roll pin black high temperature (ppa) 3505-30 3505-31 snap-in gray high temperature (ppa) n3505-30 n3505-31 snap-in beige high temperature (ppa) n3505-30b n3505-31b snap-in black selective pin removal (ata or other compatability) ? wire wrap tails styles ? kinked tail (k2 option) positions: 2500 & 3000 series shrouded header total number of pins number of tails kinked positions kinked 10 4 3 4 7 8 14 4 3 4 11 12 16 4 3 4 13 14 20 4 3 4 17 18 24 4 3 4 21 22 26 4 3 4 23 24 30 4 5 6 25 26 34 4 7 8 27 28 36 4 7 8 27 28 40 4 7 8 33 34 50 4 7 8 43 44 60 4 11 12 49 50 64 4 11 12 53 54 kinked tail detail: kink is located .05 below bottom surface of plastic. external radius of kink toward part centerline. ordering information x3xxx - xxxx xx blank = std. temp gray (pbt) /(blank or ub pltg. reqd.) n = high temp beige (pct) /(blank or ub pltg. reqd.) n = high temp black (pct)/(rb plating reqd) 3m part number (see table 1) latch/ejector system 0 = no latch/ejector 2 = short roll pinlatch/ejectors 3 = long roll pin latch/ejectors shroud and pin confguration 1 = 3 wall, right angle solder tail 2 = 3 wall, straight solder tail tail 02 = solder tail for .062 [1.57] thick board k2= kinked solder tails for .062 [1.57] thick board 03 = solder tails for .094 to .125 [2.39 to 3.18] thick board blank or ub = 30 ? gold with sn/pb tails (app. e3 & c2 apply) rb = 30 ? gold with matte tin tails (app. e1 & c1 apply)
3 electronic solutions division interconnect solutions http://www.3m.com/interconnects/ 3m is a trademark of 3m company. for technical, sales or ordering information call 800-225-5373 3m ? three-wall header .100 .100 latch/ejector, straight and right angle 3000 series ts-0771-c sheet 5 of 5 . 3 2 1 [ 8 . 15] . 1 00 dia [ 2 . 5 4 ] polariz i ng post note : insert p o s t int o one moun tin g h ardwa re hole o n bot t o m o f head er. s e t p o s t t o pro t r ude . 1 1 5? [2.92] 3 201 - 3 p b t g r a y 3 201 - 4 l c p b l a c k polarizing keys . 1 5 [ 3 . 8 ] . 0 9 [ 2 . 3 ] a b r e a k a w a y t a b . 3 4 r e f [ 8 . 6 ] not e : # 2216 b / a s cot c hweld c an b e used t o adhe re k e ys. d i m a n 3 5 1 8 l c p b l a c k . 0 2 3518 p b t g r a y . 0 2 mounting hardware . 3 1 [ 7 . 9 ] . 5 0 [ 12. 7 ] p a nhea d thr ead cut t i n g screw: # 4 -24 x 5 / 1 6? type: u s a s t d b t , federa l b g hex hea d b o l t, nut a nd w asher b o l t - #2- 56 x 1 / 2? 3341- 5 ( i nstal l ed f r om b o t t om o f b oard ) 3 341- 6 (must b e i n s e rte d p rior to lat c h o n v e rti c a l h eade rs) 3 341-5 & 6 m a ter i al - sta i nless s t eel
regulatory information appendix 3m electronic solutions division/interconnect europe appendix e1: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product is rohs compliant 2005/95/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e2: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/747/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e3: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment as amended by commission decision 2005/618/ec. this product contains lead in the solder tail area in excess of the maximum concentration value allowed. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix e4: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical & electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains decabde in the insulating material in excess of the maximum concentration value allowed but is compliant by exemption under eu commission decision 2005/717/ec. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below.product warranty stated below. ria-2217a-d
appendix e5: european union rohs directive 2002/95/ec, restriction of the use of certain hazardous substances in electrical and electronic equipment, as amended by eu commission decision 2005/618/ec. this product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under item 6 of the annex to the directive. rohs compliant 2005/95/ec means that the product or part (product) does not contain any of the substances in excess of the maximum concentration values in eu directive 2002/95/ec, as amended by commission decision 2005/618/ec, unless the substance is in an application that is exempt under eu rohs. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. china appendix c1: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does not contain any of the following substances in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the warranty stated below. appendix c2: china rohs electronic industry standard of the peoples republic of china, sj/t11363-2006, requirements for concentration limits for certain hazardous substances in electronic information products. this symbol, per marking for the control of pollution caused by electronic information products, sj/t11364-2006, means that the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. unless otherwise stated by 3m in writing, this information represents 3ms best knowledge and belief based upon information provided by third party suppliers to 3m. the numerical reference in the symbol above should not be construed as a representation regarding the products life or an extension of a product warranty. the product warranty is stated below. in the event any product is proven not to conform with 3ms regulatory information appendix, then 3ms entire liability and buyers exclusive remedy will be in accordance with the product warranty stated below. ria-2217a-d
important notice all sta tements, technical informa tion, and recommenda tions rela ted to 3m? s products are based on informa tion believed to be reliable, but the accurac y or completeness is not guaranteed. before using this product, you must evalua te it and determine if it is suitable for your intended a pplica tion. y ou assume all risks and liability associa ted with such use. an y sta tements rela ted to the product which are not contained in 3m? s current publica tions, or an y contrar y sta tements contained on your purchase order shall ha ve no force or effect unless expressly a greed upon, in writing, by an authorized of?cer of 3m. w arranty; limited remedy; limited liability . this product will be free from defects in ma terial and manufacture for a period of 90 days from the time of purchase. 3m makes no o ther w arranties including, but no t limited to , any implied w arranty of merchant ability or fitness for a p ar ticular purpose. if this product is defective within the warranty period sta ted above, your exc lusive remed y shall be, a t 3m? s option, to replace or repair the 3m product or refund the purchase price of the 3m product. except where prohibited by la w , 3m will not be liable for an y indirect, special, incidental or consequential loss or damage arising from this 3m product, regardless of the legal theor y asserted. p l e a s e r e c y c l e . p r i n t e d i n u s a . ? 3 m 2 0 0 8 . a l l r igh t s r ese r ve d . r i a - 2 2 1 7 a - d ? 3 m ele c t r o n i c s o l u t i ons d ivi s i o n 6 8 0 1 r i ve r p l ace b l v d . a u s t i n , t x 787 2 6 - 9 0 0 0 u .s. a . 1 - 8 0 0 - 2 2 5 - 5 3 7 3 www . 3 m . c o m / i n t e rcon n e c t s 3m is a trademark of 3m compan y . ap p e n d ix c 3 : c hin a r ohs e l e c t r o n i c i ndu s t r y s t a n d a rd o f t he p eo p l e ? s r e p u b l i c o f c h i n a , s j / t 1 1 3 6 3 - 2 0 0 6 , r e q u i r e men ts f or c o n c e n t r a t i o n l i m i ts f o r c e r t a i n ha z a r d o u s s u b s t a n c e s i n e l e c t r o n i c i n f o r m a t i o n p r o d u c t s . t h i s s ym b o l , p e r m a r k i n g f or t h e co n t r o l o f p o l l u t i o n c a u s e d b y e l e c t r o n i c i n f o r m a t i o n p r o d u c t s , s j / t 1 1 3 6 4 - 2 0 0 6 , m e a n s t h a t t he p r o d u ct o r p a r t d oe s c o n t a i n a s u b s t a n c e , as d e t a i l e d i n t h e c h a r t be l o w , i n e x c e s s o f t he f o l l o w i n g m a x i m u m c onc e n t r a t i o n v a l u e s i n a n y h o m o g e n eo u s m a te r i a l : (a) 0 . 1 % ( b y w e i gh t ) f or l e a d, m e r c u r y , h e x a v a l e n t c h r o m i u m, p o l y b r o m i n a te d b i p h e n y l s o r p o l y b r o m i n a te d d i phe nyl e t h e rs ; o r ( b ) 0 . 0 1 % ( b y w e i gh t ) f o r ca d m i u m . u n l e s s o t h e r w i s e s t a te d b y 3 m i n wr i t i n g , t h i s i n f o r m a t i o n r e p r ese n t s 3 m ? s be s t k n o w l e d g e a n d be l i e f b as e d u p o n i n f o r m a t i o n pro v i d e d b y t hird p a r t y sup p l i e rs t o 3 m . t h e n u m e r i c a l r e f e r e n c e i n t h e s ym b o l a b ove s h o ul d n o t be c o n s t r u e d as a r e p r ese n t a t i o n r e g a r d i n g t he p r o duc t ? s l i f e o r a n e x te n s i o n o f a p r o d u ct w a r r a n t y . t h e p r o duc t w a r r a n t y i s s t a te d be l o w . i n t h e e v e n t a n y pro duct i s pro v e n n o t t o c o n f o r m w i t h 3 m ? s r e g u l a t o r y i n f o r m a t i o n a p p e n d i x , t h e n 3 m ? s e n t i r e l i a b i l i t y a n d b u y e r ? s e x c l u s i v e r e m e d y w i l l be i n a c c o r d a n c e w i t h t h e p r o d u c t w a r r a n t y s t a te d be l o w .
|
